GoPro Water Damage Repair Services UK

Accidental saltwater or freshwater exposure? Fast mail-in GoPro liquid damage diagnostics and ultrasonic cleaning. Send it to our workshop quickly to prevent rust.

Professional Ultrasonic Cleaning & Component Recovery

Water damage doesn’t have to mean your camera is completely dead.
We provide professional GoPro water damage recovery services across the UK. By utilizing advanced diagnostic tools and precision ultrasonic cleaning, our expert technicians strip down flooded units, neutralize corrosive mineral deposits, and repair board-level circuitry to restore your camera to perfect working order.

⚡ Liquid Damage Emergency Tip: If your camera was exposed to saltwater, do not try to power it on or charge it. Remove the battery and SD card immediately, leave the side doors open, and book your repair as quickly as possible to prevent permanent circuit corrosion.

Has your GoPro taken an unexpected swim, leaked during a dive, or refused to turn on after exposure to water? Water damage doesn’t have to mean your camera is completely dead, and our multi-stage restoration process yields a high recovery rate.

⚠️ Important Notice Regarding Severe Liquid Damage

While we successfully revive the majority of flooded cameras, it is vital to know that severe liquid exposure—especially saltwater—can sometimes cause catastrophic corrosion to the main logic board circuitry. If multiple micro-components or the internal layers of the motherboard are completely ruined, the cost of parts may exceed the value of the camera.

If our diagnostic team determines your GoPro is beyond economic repair (BER), we will contact you immediately to explain your options. We charge a flat £20 diagnosis fee for models starting from the Hero 9 to cover technical disassembly and testing.

GoPro Water damage repairs
GoPro Water Damage repairs services .

Can Water-Damaged GoPro Cameras Be Fixed?

There is no simple “yes” or “no” answer to this question because the extent of liquid damage varies greatly from one camera to another.
When it is a “No”:
Sometimes, a flooded GoPro is beyond economic repair. If the camera was left in saltwater or powered on while wet, the internal motherboard can suffer catastrophic corrosion. Components get fried, the front and rear screens fail, and the delicate internal cables can become completely rotten. In severe cases like this, fixing the camera requires replacing almost every single internal part. Because it is like building a whole new camera, it is rarely worth the cost.
When it is a “Yes”:
However, in many cases, we can completely save the camera. When we take the GoPro apart in our workshop, we often find that the screens are still perfectly fine, and the damage is limited to minor motherboard issues that we can clean and repair. In these instances, a professional repair is highly successful and saving your camera is absolutely worth it.
The Best Way to Know:
Because every liquid incident is unique, it is impossible to know what your camera needs without looking inside. The best option is to send your GoPro to us for a Water Damage Inspection. Our expert technicians will safely disassemble your camera, assess the internal circuitry, and give you an honest breakdown so you can decide how you want to proceed.

Our Water Damage Repair Process & Pricing

  • Full Strip-Down & Inspection: We completely disassemble the camera housing to assess the extent of the liquid penetration.
  • Ultrasonic Board Cleaning: The main logic board is treated in a specialized ultrasonic bath with isopropyl alcohol to safely lift away corrosion, rust, and salt crust.
  • Component-Level Diagnostics: We test individual micro-components under thermal imaging to identify and replace shorted capacitors or blown power rails.
  • Rigorous Testing: Once rebuilt, your camera undergoes a 24-hour diagnostic cycle to ensure battery performance, sensor clarity, and touch controls work perfectly.

Because every liquid ingress case is unique, it is impossible to provide an exact repair estimate over the phone or via email. One camera may simply require a deep chemical clean, while another may need a full component-level motherboard replacement. We cannot determine what your GoPro needs until our technicians safely disassemble the camera and inspect the internal circuitry.

To make the process as fair and transparent as possible, we operate on a clear two-stage system

  • Stage 1: Inspection & Diagnostics (£20.00)

    Because liquid ingress can affect components in completely unpredictable ways, we cannot offer an accurate repair estimate without examining the device first.
    • Book Online: Start by booking your water damage diagnostic service through our website.
    • Send Us Your Camera: Pack your GoPro safely (following our shipping instructions) and post it to our UK workshop.
    • Expert Assessment: Our technicians will carefully disassemble the camera, perform a thorough physical assessment of the internal circuitry, and run diagnostics to see exactly what needs to be fixed.
  • Stage 2: Your Custom Quote (3-5 Days)

    While it is impossible to give a guaranteed quote before looking inside, we know you want a rough idea of what to expect. To give you peace of mind, most of our successful GoPro water damaged repairs typically fall between £70 and £95.
    • If you accept the quote: We proceed with the repair, get your GoPro fixed, and post it back to you tracked.
    • If it is Beyond Economic Repair (BER): If the internal components are completely ruined and it is not worth fixing, you pay nothing more. You only ever risk the initial £20 diagnostic fee.

❓ Frequently Asked Questions

  • Is it worth fixing a water-damaged GoPro?
    Yes, if the damage is limited to the motherboard and the screens are still working. However, if all internal components and screens need replacing, it is usually not cost-effective. Our £20 Inspection will give you a definitive answer.
  • Can you fix a GoPro dropped in saltwater?
    Saltwater causes rapid corrosion and leaves mineral deposits behind. While it is much harder to fix than freshwater damage, we can often save the camera if it is sent to us quickly for an Ultrasonic Clean.
  • Should I put my wet GoPro in rice?
    We advise against this. Rice dust can get inside the camera housing and cause more harm. Instead, remove the battery and SD card immediately, leave the side doors open, and send it to a professional as soon as possible.
  • How long does a water damage inspection take?
    Once your camera arrives at our workshop, our technicians typically complete the full diagnostic check and contact you with a report within 24 to 48 hours.
Flash Flash

3-5 Day Turnaround

Repaired, tested, and dispatched within 3 to 5 working days.

Tracked UK Shipping

Safely returned via secure, fully tracked Royal Mail Special Delivery postal services

Star-empty Star-empty

Premium Parts

High-quality assemblies matching factory brightness and touch standards.

Expert Technicians

Specialized action camera repair center based in Witney, Oxfordshire.

0
0
Your Cart
Empty CartNo repairs booked yetBook a Repair
Secure Checkout
Fast Shipping
Easy Returns